求助：e1200 flash完tomato後就只入唔返。

病態賭徒

用Mac check IP 就show 168.254.x.x

係咪已經brick了？

tomleehk

1) After power on, did the power LED keep on flashing without stop ?
2) What was the firmware filename you used to flash to your E1200 ?

病態賭徒

1) yes
2) need to check, left in office

tomleehk

1) Power off router and connect LAN cable to any LAN port of router.

2) Configure the local network adapter on the laptop to a Static IP of 192.168.1.25, Netmask 255.255.255.0, and Default Gateway of 192.168.1.1.

3) From a command prompt, type ping -t 192.168.1.1  , hit <ENTER>  (which will show the laptop attempting to repeatedly ping the bricked router)

4) Then plug the router to power on and see if there is any response at the command windows within first 15 seconds...

tomleehk

http://www.dd-wrt.com/phpBB2/vie ... e23b9e32e52ea153817
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=318082#318082
http://www.dd-wrt.com/phpBB2/vie ... d845440f39d79dc1c05
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=155978
https://www.ifixit.com/Guide/Dis ... Linksys+E1200/22917

病態賭徒

typo

169.254.x.x

2) tomato-K26-1.28.9054MIPSR2-beta-Std


thanks for your research, I will study after finishing office work

btw, if fail, can I send back to repair?

tomleehk

Q1>  btw, if fail, can I send back to repair?
A1>  I am afraid you have to ask the 代理 and see if the cost is really worth..

This looks like dd-wrt (as well as its forum) was down by noon today..

病態賭徒

Q1>  btw, if fail, can I send back to repair?
A1>  I am afraid you have to ask the 代理 and see if t ...
tomleehk 發表於 2014-11-18 12:34

    bcoz it is under warranty

tomleehk

bcoz it is under warranty
病態賭徒 發表於 2014-11-18 12:40

Under warranty ..

Don't open the case ...

Send to 代理 and see if they use their own way to fix it or replace a new one for you..

However,  don't mention what you have done as what you have done manually is definitely beyond warranty coverage..

病態賭徒

let see see if I can fix.....

thanks million tomleehk