[開箱文] Swiftech Apogee XT

外觀比 apogee gtx 更靚仔

跟 775, 1156, 1366 backplate

解體

個人覺得設計同 hk 3.0 類似

未命名.jpg

據官方"聲稱"效能比 HEATKILLER 低 1 度

Intel® Core™ i7 920 (Bloomfield D0) (@4095 Mhz - 1.392 V Actual)
Water-Block	Delta T (*)
Apogee™ GTZ	40.82 °C
Apogee™ XT (factory inlet configuration)	37.88 °C
Apogee™ XT (alternate inlet configuration) (**)	37.99 °C
Reference competitive data (Heatkiller rev3.0)	39.39 °C

Comments:

In factory configuration, the Apogee™ XT showed a 3°C improvement over the Apogee™ GTZ.
A 1.5 °C improvement was observed compared the best competitive waterblock tested in our lab.
The temperature degradation between factory inlet configuration and alternate inlet configuration was 0.1°C

(*) Delta T is the difference in temperature between averaged CPU core temperature as reported by RealTemp and averaged air temperature reported by 3 thermal probes located at the fans inlets.
(**) Alternate inlet configuration is when the inlet is rotated at 180° to allow installation of extra large compression fittings.

測試留待加埋下面呢樣o野繼續

[ 本帖最後由 kumakuba 於 2009-12-6 20:43 編輯 ]

0

0

felixku

進階會員

Rank: 3 Rank: 3 Rank: 3

2^#

發表於 2009-12-6 20:35 | 只看該作者

真係靚仔,不過覺得gtz好睇啲..

TOP

highflyer

進階會員

Rank: 3 Rank: 3 Rank: 3

3^#

發表於 2009-12-6 21:05 | 只看該作者

張pins 相睇得唔清楚. 點解好似好多''銹漬''?

同埋我見有外國玩家話新入手都有d pins 彎左, 你自己快d逐條pin 睇下啦.

我同你都係用Boreas TEC, 都係同門師兄弟, 我還先你入門學武, 點解師父偏心, 俾apogee xt 你, 我得hk 3.0 o查.

(EK Supreme HF 就快出, 唔知會唔會有大效能增長呢? )

TOP

kumakuba

進階會員

Rank: 3 Rank: 3 Rank: 3

4^#

發表於 2009-12-6 21:16 | 只看該作者

原帖由 highflyer 於 2009-12-6 21:05 發表
張pins 相睇得唔清楚.  點解好似好多''銹漬''?
同埋我見有外國玩家話新入手都有d pins 彎左,  你自己快d逐條pin 睇下啦.

我同你都係用Boreas TEC, 都係同門師兄弟, 我還先你入門學武, 點解師父偏心, 俾apogee xt 你, 我得hk 3.0  o查.

(EK Supreme HF 就快出, 唔知會唔會有大效能增長呢? )