legolee

don't glue it back la.
glue makes gap, and you will have to use more thermal compound.

Best is naked die, or put back on IHS without glue (very easy)

As I said multiple times, people did research and found that the original glue was too think, thus making gap between die and IHS, resulting in high temp.

SABT

回覆 25# krispc

其實都有可能關事，補番張圖

legolee

回覆  krispc

其實都有可能關事，補番張圖
SABT 發表於 2015-9-23 21:02

    1.39V for 4.8?
Why so high?
I am running 4.8 @ 1.28-1.3V

SABT

回覆 33# legolee
我用asus auto level up咋，not manual setting

bbqaaq

用緊4790K, 都係4.8已經封頂
之前第一粒我bios set錯電壓bump爛左, 去代理換過粒新既

結果兩粒都差唔多, 4.8 full load已經講緊差不多90度core temperature
所以都係set番4.6算

講真, 4790k 一d 都唔好超....

legolee

4790k hot and overclock potential is really so so ~_~
But single thread performance is superior!

uesugi

唔好打機試吖 之前就係咁打LoL BO5團戰直接藍底白字....
Jeffrey_2000711 發表於 2015-9-14 07:34

其實超到藍底白字.....會傷身嗎? BTW, 唔計LN2，想找些家用機的超頻方法來參考，誤打誤撞唔係辦法。
現在用緊R5E 配5930K, Gskill 3000 --->在BIOS用CPU level up 來auto tune 上4.4 ....auto 是1.28V, RAM就xmp上了3000mhz，
跑國象就穩上48....少有可以上到49.4x， 閒置37度左右.....跑國象就50度左右。

uesugi

回覆  krispc

其實都有可能關事，補番張圖
SABT 發表於 2015-9-23 21:02

看cap圖.....1.39V 都去到幾盡下?   少數人可以1.15V上4.8.......

s84292

看cap圖.....1.39V 都去到幾盡下?   少數人可以1.15V上4.8.......
uesugi 發表於 2015-9-30 10:49

5930K 冇咩可能1.15V上4.8,應該是BIOS讀取錯誤

一般都係1.22-1.25 在4.2-4.4Ghz, 大部份都要1.25+先去到4.5

1.15 4GHZ都困難

uesugi

5930K 冇咩可能1.15V上4.8,應該是BIOS讀取錯誤

一般都係1.22-1.25 在4.2-4.4Ghz, 大部份都要1.25+先去到 ...
s84292 發表於 2015-10-2 08:44

可能記錯, 應該是5960X.....1.15V上4.8

另外想請教如下, 想同時間升DDR4上3000.....可以點tune? 因為現在透過BIOS一選3000.....就boot唔起機了,其他數據沒有調整下