Mini-CaCtuS

回覆 10# kcto


    多謝ching提醒,我一直都有留意呢舊野,可惜佢官網寫住Not officially supported for Skylake delid,加上我自己度過其實夠位俾我壓,咁我就冇理到呢個扣lol,不過其實佢ge長短對我成件事都有幫助ge,值得考慮~

kcto

回覆 11# Mini-CaCtuS

墊薄紫銅片都得

Mini-CaCtuS

回覆 12# kcto


    有機會打算訂造個得1mm厚ge IHS黎搞呢壇野hehe

danny9428

可惜MSI個Delid guard得佢Xpower底板先會有 冇得另外配

Mini-CaCtuS

回覆 14# danny9428


    跟xpower個delid Die guard 係for haswell, 就冇得散賣，但for skylake 個die guard(冇delid字頭) 就好似可以散賣，而且係金屬色

danny9428

見到HardOCP係教人切socket四角既膠位 (又係cut jj大法!?)
https://youtu.be/8ZaupV3MLjs?t=1010
不過佢貼到粒cpu pcb封哂貼條

望落有d危險玩命

Mini-CaCtuS

回覆 16# danny9428


    OMG,感謝Ching咁有用ge資訊!!
HardOCP個小編好似話就算Direct mount左,都睇唔到3度分別 :(((

Naked Die Temperature Risks & Results

To be succinct, I would not suggest going naked with the die at this time with Kaby Lake or Skylake processors. The best temperature delta I was able to get out of the naked die was 3 degrees C. Not exactly a huge benefit with the risk involved with going this route.

chanfc2015

回覆  danny9428


    OMG,感謝Ching咁有用ge資訊!!
HardOCP個小編好似話就算Direct mount左,都睇唔到3度 ...
Mini-CaCtuS 發表於 2017-2-26 17:58

    估唔到都只係差3度,咁真係唔值得冒咁大風險!!!

Mini-CaCtuS

回覆 18# chanfc2015


    係,所以準備打消direct mount念頭X_X

chun20077

等睇gg