laughman

好詳細謝謝分享

YC_ming

1.37上到4正常不?

An17d

留名

An17d

留名.

Just bought 2950x and X399, thank you for your post and I will surely refer to your post for my next OC experience. I am sure other brother and the forum admin found your post helpful.

餃粉

留名.

Just bought 2950x and X399, thank you for your post and I will surely refer to your post for  ...
An17d 發表於 2018-9-5 01:31

I am glad you find it useful and good luck to your OC adventures with your 2950X. I have OCed my mate's 1950X before using a very similar methodology, but the key to OCing TR is watch out for hitting current limit on ur Power Supply. They can draw up to 250W easily, so watch out of the current limit when you hit your CPU and GPU hard for extended periods.

掃馬想機

https://www.hkepc.com/forum/view ... &extra=page%3D1

NB如果要行正常自己超頻都要留意

An17d

回覆 155# 餃粉


Thanks for your reply! 250W!!! That’s crazy!
Let me get the system up and running and report back the here about the power draw!

餃粉

回覆  餃粉


Thanks for your reply! 250W!!! That’s crazy!
Let me get the system up and running an ...
An17d 發表於 2018-9-6 10:10

My mate had a 1950X + GTX1080Ti with a EVGA 700W B1 , and it was crashing under synthetic load on both CPU and GPU (both OCed on Water), we thought it was unstable overclocks on the CPU, but it was fine on Prime95 and OCCT, so we added a 500W just for the graphics card and we were stable, so once he swapped out his 700W to a Antec NEG 750W, it was fine.

qq200367

師兄..我想問下ram 設置問題
RAM: kingston DDR4-3000 (HX430C15PB3K2/16)(Intel XMP 2.0)
主板: ASUS B450-F
CPU: 2700x
主板set : auto 超頻 得2300頻率到 時序最低C17
主動set 3000頻率 時序就 C18-21-21 (有時C19-22-22)
請問係咪正常?(本身RAM就寫 C15-17-17時序)
小弟真係唔喺好識...

manhoi

師兄..我想問下ram 設置問題
RAM: kingston DDR4-3000 (HX430C15PB3K2/16)(Intel XMP 2.0)
主板: ASUS B45 ...
qq200367 發表於 2018-9-29 18:18

唔正常 人地@1.35V 先做到