Offer

第二批會明天下午送到A Shop,之後會發PM 比各位取貨

bigrayhk

已取貨。Thanks.

doubleL

0.53應該也可以

你看看有沒有ttyUSB0
我的sample lcdproc.conf & LCDd.conf 抄左未 ...
Offer 發表於 2011-9-13 14:42

抄左. restart lcdproc 出現...
lcdproc not running?
Starting lcdproc.
sock_connect: connect failed
Error connecting to LCD server localhost on port 13666.
Check to see that the server is running and operating normally.

咁我應該用乜PORT???

Offer

回復 223# doubleL


default is 13666, please confirm you have ttyUSB0
Please also restart LCDd

doubleL

好似無 ttyUSB0
可以點CHECK CONNECT 左邊個USB??

Offer

好似無 ttyUSB0
可以點CHECK CONNECT 左邊個USB??
doubleL 發表於 2011-9-14 00:46

下載 (33.55 KB)

2011-9-14 07:15

doubleL

Offer 發表於 2011-9-14 07:16

check 左係無. 我有6個usb 我已經遂個試都係唔得....

Offer

check 左係無. 我有6個usb 我已經遂個試都係唔得....
doubleL 發表於 2011-9-14 11:00

你末裝USB DRIVER

doubleL

你末裝USB DRIVER
Offer 發表於 2011-9-14 11:10

    下FREENAS都要裝,,,,,咁點裝??

Offer

下FREENAS都要裝,,,,,咁點裝??
doubleL 發表於 2011-9-14 11:57

Win + Linux +Win CE + MAC OSX Driver

http://www.silabs.com/products/m ... idgeVCPDrivers.aspx





Linux Driver

http://www.silabs.com/Support%20 ... cp210x-3.1.0.tar.gz





To Install the CP210x Drivers:

Please review RELEASE-NOTES prior to installing for any known installation issues.

**Do Not Log In as ROOT**

Unzip cp210x-3.1.0 in your home directory.

**Please note that in 2.4, the path to usb-serial.h is hard coded in the file ./cp210x/cp210x.h

**Please note that in 2.4, the path to KERNELDIR is hard coded in the file ./cp210x/rules.mak

To make install and source rpm packages, from a terminal prompt:

run ./makerpm

To install, run the rpm installation package which by default will be at:

cd /var/temp/silabs/rpmbuild/RPMS/i386

double click on cp210x-3.1.0.i386.rpm

Follow onscreen instructions.