本帖最後由 harryytm 於 2017-5-18 01:40 編輯
有 05 正常,
出廠mark 咗 detect 唔到, 只要唔增加, 算正常
後來sector 由 C5 變 05, 會影響速度, scan 時 ...
raym123 發表於 2017-5-16 12:14 
師兄你錯啦,正常出廠係唔會有05。
無錯硬碟出廠嘅候,會mark咗啲製造缺陷嘅壞區並且隱藏咗(P-list),但唔係計落05(G-list)度。
There are at least two methods of bad sector re-mapping or translation these are named...
The P-list contains defects found during the final stages of the manufacturing process and are known as Primary Defects
The G-List contains defects that develop during use of the drive and are known as Grown Defects
There are also some other defect lists found in modern drives but the principles are similar. For example, you may find a T-List also known as the Track defect list, and there are a few others that describe errors in the system area of the drive.
Some manufacturers name these lists differently but for the sake of simplicity we will stick to Primary (P-List) and Grown (G-List).
https://www.mjm.co.uk/bad-sector-remapping.html |