本帖最後由 cccccctt 於 2011-1-20 02:58 編輯
回復 cccccctt
rom係咪用clicker畀嗰個?
ihmcjacky 發表於 2011-1-20 02:21 
歐版rom冇中文
XWJS3係最新的ROM, 怕有問題可以用回XXJPY
關於XWJS3的thread
http://forum.xda-developers.com/showthread.php?t=917256
其實flash 2.2.1只係爽的第一步
之後再用埋doc's rom + speedmod kernel
直頭飛咁快
FYI...
flash XXJPY step:
http://forum.xda-developers.com/showthread.php?t=818556
01] Startup Odin.
a) Click PIT Button, select s1_odin_20100512.pit file
b) Click PDA Button, select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
c) Click CSC Button, select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
d) Click Phone Button, select MODEM_I9000XXJPU.tar.md5
e) Make sure you have re-partition ticked.
02] Power off your phone and make sure you have SIM card out, SD card out. Disconnect USB.
03] Press and hold 3-button combo, to boot your phone in Download mode (Volume down, Home, Power)
04] Connect your phone to the PC via USB cable.
05] In odin, ID:COM field shall change color to yellow, and in Message window, you will see message "Added"
06] Now press Start button.
07] Go and take cigarette, coffee, etc. This will take up to 5 minutes.
08] Phone will reboot itself. Disconnect USB. Pull out battery, once it is booted, and place it back.
09] Press and hold 3-button combo, to boot your phone in Download mode (Volume down, Home, Power)
10] Close and open Odin again.
a) Click PIT Button, select s1_odin_20100512.pit file
b) Click PDA Button, select JPY_JPY_JPY.tar file
c) Make sure Re-Partition Button IS NOT ticked
d) Connect your phone to the PC via USB cable.
e) In odin, ID:COM field shall change color to yellow, and in Message window, you will see message "Added"
f) Now press Start button.
g) Go and take cigarette, coffee, etc. This will take up to 5 minutes.
11] After successfull flash, phone will reboot itself, and Odin will write Success message. First boot can take another 10 minutes, so be patient during stare at glowing S logo on the screen. |