回復 197# 的帖子

error code "0x54" = Firmware version mismatch with controller type.
quoted from Error Code menu of MDPT.

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

原帖由 logoff 於 2008-3-4 22:13 發表
error code "0x54" = Firmware version mismatch with controller type.
quoted from Error Code menu of MDPT.


ChipGenius 2.38

Snap1.png (33.15 KB)

Snap1.png

TOP

原帖由 mad scientist 於 2008-3-4 22:09 發表
U230 2GB


2008-3-4_0011.png

2008-3-4_0010.png
可能因為新買,所以PID有小小唔同,暫時試過幾隻軟件都唔得

PS:PID要0059先會搵到新驅動程式
2008-3-4_0012.png
2008-3-4_0013.png

TOP

原帖由 kmb3av188 於 2008-3-4 22:21 發表


637423

637424
可能因為新買,所以PID有小小唔同,暫時試過幾隻軟件都唔得

PS:PID要0059先會搵到新驅動程式
637421
637422


what is the SN of your drive

TOP

原帖由 mad scientist 於 2008-3-4 22:22 發表


what is the SN of your drive

IMG_1642.jpg (107.36 KB)

IMG_1642.jpg

TOP

原帖由 流星雨 於 2008-3-4 18:30 發表
請問有無師兄成功整到 WINDOWS XPE 落隻手指度 ?
我已經成功整到 WINDOWS XP INSTALL CD 入隻手指度,
裝到機無問題,但係 WINDOWS XPE 就有少少問題,可以
成功 BOOT 到入 WINDOWS,但係程式集入面所 ...

Followed  the instructions in the "No Name Team" website, I have migrated the XPE ver.080116 into the USB thumb and run smoothly. By the way, please advise where can I dl the STANDALONE iso file of  XPE 2008 新春版

TOP

原帖由 kmb3av188 於 2008-3-4 22:26 發表



I have two U230 2GB, both detected as 0054

maybe you can try  the   3.9.12.0 software ver

TOP

原帖由 logoff 於 2008-3-4 22:26 發表

Followed  the instructions in the "No Name Team" website, I have migrated the XPE ver.080116 into the USB thumb and run smoothly. By the way, please advise where can I dl the STANDALONE iso file of   ...


可能係我表達得唔係咁好,我知道可以將 XPE 放入手指度 RUN,
不過而家我隻手指已經用 TOOLS 整到變左有一個 USB HDD 同埋一個 USB CD ROM,
而我就係想將個 XPE.ISO 放入個 USB CD ROM 度 RUN,但係就出現左無晒 D 外掛程式
既問題,睇左好多網站都搵唔到解決方法 ........ 你想搵 STANDALONE ISO OF 新春版,
係咪即係剩係得個 XPE,無加任何外掛程式 ?? 我都只係去 GOOLE 度 SEARCH,好快
就搵到,所以都無記低在邊個地方搵到,或者你自己去 GOOLE 度 SEARCH 下啦,應該
好易搵到既。

TOP