[中央處理器] r5e auto電壓問題

alexanderman

CPU-Z顯示的是CPU VCore Voltage，跟你講的CPU Input Voltage係兩回事，而後者在1.9V仍在風冷或同等性能的一體水冷的安全範圍內

BTW, CPU體質粒粒唔同，有D就似你粒U咁，要高D電壓先至超得高，但我唔建議長行1.4V以上

梁瀚文

1.3V內穩行4.5G已經叫大鵰，1.27穩行4.5G應該有D難
541023 發表於 2015-3-9 14:13

我果粒1.26V穩行到4.5G... 1.303V穩行4.6G...但系都好似只系中上水平...

下載 (149.79 KB)

2015-3-9 14:21

http://www.coolaler.com/showthre ... 960x-ddr4-2133-4gx4 呢粒先系真大雕

梁瀚文

我粒5820K 1.2V先行到4.2，想降1格電都藍畫面
541023 發表於 2015-3-9 14:43

我果粒行4.2G要1.15V

梁瀚文

回復 alexanderman

我知，但1.4v係auto加上去，我發現時已經，，，，，行左2個月
姐係cpu input 1.8係正常 ...
a123123456 發表於 2015-3-9 15:07

cpu input 1.8V全世界都系甘...
同埋超頻最好摸清楚CPU既體質,搵出最適合它行既電壓...
盡量唔好行底板Auto Scale既電壓...甘玩法再超上去好快出事...

alexanderman

回復 alexanderman
姐係cpu input 1.8係正常？

正常

1. CPU Input Voltage (CPU VRIN): This is the voltage that the motherboard provides to the CPU, and the CPU then takes this voltage and produces all the other voltages. The default for this voltage is 1.8v, however, increasing this voltage can help a little bit. I would stay under 2.1 on air cooling, as increasing this voltage will increase the delta between this and the other voltages, which will increase the internal CPU VRM's temperatures.

複製代碼

回復 alexanderman
cpu core 1.4v太高？

1.4V雖尚在可接受的範圍內，但F個人偏好長用VCore是1.35V或以下。

1. This is the main voltage to the CPU Core domain. Default for these CPUs is around 1.00v, I suggest staying under 1.35 to 1.4v on air/water, as cooling anything above 1.35v seemed to be impossible with 100% load. These CPUs do throttle between 80C and 90C.
   
2. 
   
3. Read more at http://www.tweaktown.com/guides/6755/intel-core-i7-5960x-extreme-edition-s-spec-qfra-cpu-overclocking-guide/index3.html

複製代碼

Ref: http://www.tweaktown.com/guides/ ... g-guide/index3.html

alexanderman

盡量唔好行底板Auto Scale既電壓...甘玩法再超上去好快出事...

同意，auto settings下，D底板好鍾意俾Vcore、Cache、RAM等好高電壓