砌機問題: 溫度深測條線應該點裝?

cityhunt

我機箱係可以睇溫度的那種,
有一條扁扁地既線係 Temperature Sensor Probe,
我睇說明書唔係好明佢要點裝,
有無人識? 說明書是這樣說的.
Don't put the temperature sensor probe on the CPU,
it need put on the radiator fin of CPU, structure of inner,
HDD and so on.
If put on CPU, it will appear bad phenomena.
主要係唔明這一句.

vodaben

原帖由 cityhunt 於 2009-9-21 10:11 發表
我機箱係可以睇溫度的那種,
有一條扁扁地既線係 Temperature Sensor Probe,
我睇說明書唔係好明佢要點裝,
有無人識? 說明書是這樣說的.
Don't put the temperature sensor probe on the CPU,
it need put on the rad ...

貼系散熱器D "la"位, Harddisk.....

snlworld

貼係cpu同heatsink中間(記得落散熱膏)

muihin

我見有D就咁响個機箱風扇隔離

lingho

原帖由 snlworld 於 2009-9-21 10:44 發表
貼係cpu同heatsink中間(記得落散熱膏)

唔落膏會點?
我就咁zip入去個headsink邊邊到

mc2003

原帖由 snlworld 於 2009-9-21 10:44 發表
貼係cpu同heatsink中間(記得落散熱膏)

5建議貼係CPU及HS中間因爲會好容易夾爆個 temperature probe!!!

highflyer

原帖由 mc2003 於 2009-9-21 13:35 發表


5建議貼係CPU及HS中間因爲會好容易夾爆個 temperature probe!!!

Don't put the temperature sensor probe on the CPU

夾爆個 temperature probe 事小, 影響散熱事大(妨礙熱力由cpu 傳上去heatsink 底部)