拓竹解鎖(未能核實)網上资料

First, you need to login to Bambu Studio via the Bambu Cloud China system. You need to use a Chinese phone number to login because the login password requires an OTP sent as an SMS to a Chinese phone number only. Once you have logged in, you are done.

After logging in, you can immediately add a Chinese version printer and update the firmware.

To steal a session, it is not difficult: copy the Bambu Studio folder to C:\Users\username\AppData\Roaming\BambuStudio (zip the entire folder).

Then, if you want to use another PC or send it to a customer or someone else, just send the zipped file to that customer. Then, the customer or user can extract the file to C:\Users\username\AppData\Roaming

When the customer opens the Bambu Studio program, they will be able to access the Chinese session immediately. Then, they can add the Chinese version printer. Normally, when you add it, it will give an error IOT_ERROR_REGION_LIMITED. But now we are in Chinese User Session, there will be no more problems. We can upgrade the firmware as usual.

We can go back to LAN Mode or go back to Cloud. The Chinese Session does not disappear at all, it is still stuck all the time.
Just like this, everything can be done like a Global machine.

In this case, we can see that we really do not need to pry open any Bambu Studio program. For those who are good at prying, good at Hex Editor, just pry open the file C:\Users\username\AppData\Roaming\BambuStudio\BambuNetworkEngine.conf. If you can pry open this file, the Region Lock issue will be over.

The printer has an Access Code which is an 8-digit number that controls the printer connection anyway. Therefore, to connect the printer, we must enter the Access Code number.

我冇已鎖區大陸版所以未知是否可以