個人做了一點點測試
GMT+8, 2013-1-9 10:53, Processed in 0.141468 second(s), 7 queries.
正常系0.0X sec
最高紀錄看過3秒..
SORRY 跟手PING過...4 timeout
C:\Documents and Settings\XXXXXXX>tracert hkepc.com
C:\Documents and Settings\administrator>tracert hkepc.com
Tracing route to hkepc.com [111.92.236.61]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 10.48.128.22
2 1 ms 1 ms 1 ms 203186108001.static.ctinets.com [203.186.108.1]
3 <1 ms <1 ms <1 ms 061092090017.ctinets.com [61.92.90.17]
4 4 ms 11 ms 11 ms 014199252085.ctinets.com [14.199.252.85]
5 1 ms 1 ms 1 ms 014136128122.ctinets.com [14.136.128.122]
6 3 ms 3 ms 3 ms iservices-rge.hkix.net [202.40.161.119]
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
然後IPERF UDP SEND PACKET (3 connections)
C:\Documents and Settings\administrator\桌面>iperf -c 111.92.236.61 -i 1 -b 150mb -w 128k -P 3
WARNING: option -b implies udp testing
------------------------------------------------------------
Client connecting to 111.92.236.61, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 128 KByte
------------------------------------------------------------
[1912] local 10.48.128.63 port 44703 connected with 111.92.236.61 port 5001
[1840] local 10.48.128.63 port 44705 connected with 111.92.236.61 port 5001
[1852] local 10.48.128.63 port 44704 connected with 111.92.236.61 port 5001
[ ID] Interval Transfer Bandwidth
[1840] 0.0- 1.0 sec 3.47 MBytes 29.1 Mbits/sec
[1852] 0.0- 1.0 sec 4.18 MBytes 35.0 Mbits/sec
[1912] 0.0- 1.0 sec 3.71 MBytes 31.1 Mbits/sec
[SUM] 0.0- 1.0 sec 11.4 MBytes 95.3 Mbits/sec
[1852] 1.0- 2.0 sec 4.11 MBytes 34.5 Mbits/sec
[1912] 1.0- 2.0 sec 3.71 MBytes 31.1 Mbits/sec
.....
[SUM] 2.0- 3.0 sec 11.3 MBytes 95.1 Mbits/sec
SERVER反應是夠快的(測試電腦為10/100SWITCH)限制 |