MSI Z68 + 2500K bios auto 電 = 1.328, 冇得減只可以加?

1phone

set ratio = 45, 電 = auto, = 1.328 v. 電 set 手動 只有 + 0.001, + 0.002... 想 set 低d 都唔得.
bios 話行緊 1.328 但 cpuid 話 1.375, 邊個先系真?

gdmk

無- 0.001, - 0.002... ?

benny8888

set ratio = 45, 電 = auto, = 1.328 v. 電 set 手動 只有 + 0.001, + 0.002... 想 set 低d 都唔得.
bios  ...
1phone 發表於 2012-6-4 15:49

    that's mean , +0.001 is not 1.328+0.001 but running @ 0.001 v ?

LuminouShadow

load line calibration 有無攪過??
O人 發表於 2012-6-5 22:47

    冇記錯的話,msi bios 冇呢個選擇的

LuminouShadow

回復  LuminouShadow


    總有呢D類似的過電保護比你揀既...
名唔同功能一X樣 ...
O人 發表於 2012-6-5 22:57

小弟唔係好熟
會唔會係等於vdroop?

1phone

無- 0.001, - 0.002... ?
gdmk 發表於 2012-6-5 19:38

no, + only.
i.e. 1.328 + 0.001 / + 0.002....

1phone

that's mean , +0.001 is not 1.328+0.001 but running @ 0.001 v ?
benny8888 發表於 2012-6-5 21:46

no, if I set ratio = 45, auto will = 1.328. If I choose not "auto", the option I got is "+ 0.001/ + 0.002....". If I choose "+ 0.001", = 1.328 + 0.001 = 1.329 v. If I set ratio = 33, auto will = lower v, say 1.2xx v.