Board logo

標題: [操作疑難] 其實超ram系米會提升粒U嘅效能嘎? [打印本頁]

作者: Caesar_I    時間: 2016-9-16 01:18     標題: 其實超ram系米會提升粒U嘅效能嘎?

想問下甘多位師兄 超Ram系米對粒U嘅效能有幫助嘎
同埋Cpu Cache嘅min Ratio 同 Max Ratio 究竟要點set先好
我自己用緊6850K@4.0Ghz 1.17V 條ram系Corsair vengeance DDR4 手動傻瓜式超到2666,時序個啲完全啲唔明所以冇set過
但系跑CINEBENCH輸咗畀個用緊6800@4.0 1.2v Ram系G-skill D4 2400 行緊XMP CL15嘅fd
佢可以跑到1238 但系我點跑都系1171左右嘅分 到底系邊度出咗問題呢?
作者: 戀人未滿    時間: 2016-9-16 05:28

不會,完。
作者: PT100    時間: 2016-9-16 09:05

回覆 1# Caesar_I

Same Motherboard ? Same PSU ?

You need to know above hardware would affect the result, especially on Passmark
作者: Caesar_I    時間: 2016-9-17 00:32

回覆 3# PT100


    not same
I using i7-6850K and OC to 4.0 with 1.17V motherboard Asus STRIX x99 gaming , Corsair DD4 16G
PSU is coolermater V1200
my fd using I7-6800K and OC to 40 with 1.20V  Motherboard is Asus X99-E  G-Skill DDR4 32G  .PSU is Coolermaster V550
作者: PT100    時間: 2016-9-17 07:49

回覆 4# Caesar_I

You get a better PSU but your friend get a good motherboard !

PSU should be ignore in your case, set CPU voltage to auto and run a result, If you could obtain a higher score, I suspected your setting 1.17V are too low and affected the performance of the CPU...
作者: laiyiushing    時間: 2016-9-17 11:50

想問下甘多位師兄 超Ram系米對粒U嘅效能有幫助嘎
同埋Cpu Cache嘅min Ratio 同 Max Ratio 究竟要點set先好
...
Caesar_I 發表於 2016-9-16 01:18


唔好意思請恕小弟才疏學淺, 請問 how to 超 ram ??
作者: wormyelf    時間: 2016-9-18 03:38

想問下甘多位師兄 超Ram系米對粒U嘅效能有幫助嘎
同埋Cpu Cache嘅min Ratio 同 Max Ratio 究竟要點set先好
...
Caesar_I 發表於 2016-9-16 01:18 [url=http://www.hkepc.com/forum/redirect.php?goto=findpost&pid=35397081&ptid=2321709][/url
]


    你都係想 贏你個fd 甘你超得勁過佢咪赢羅試下4.2。 同一款cpu 跑分都可以唔同.
你粒cpu 可能體質差d .
作者: chantelise9k    時間: 2016-9-18 09:51

both 4 channel? same ram amount?
你地的系統可能有唔同背景software有影響?
ram的時序(細項)應該都有少少影響
(cpu體質 o.o)





歡迎光臨 電腦領域 HKEPC Hardware (https://h1.hkepc.com/forum/) Powered by Discuz! 7.2