Board logo

標題: 點樣先叫超左頻? [打印本頁]

作者: wasd12345600    時間: 2013-2-8 19:00     標題: 點樣先叫超左頻?

未命名.jpg         



CPU: INTEL i5 2320
MB: MSI Z77 G45
RAM: ADATA 4*4GB
請CHING賜教

圖片附件: 未命名.jpg (2013-2-8 18:59, 61.31 KB) / 下載次數 40
https://h1.hkepc.com/forum/attachment.php?aid=1491738&k=cf07424584de7feada9e28c305b9da25&t=1780894116&sid=1ckgJcojcec


作者: foktk138    時間: 2013-2-8 19:07

CPUZ睇 至少要3000.01MHz
作者: wasd12345600    時間: 2013-2-8 19:11

回復 2# foktk138


    我唔係用Z77果時,都試過去到3300.00MHz,咁而家係咪叫超左? 未命名1.jpg

圖片附件: 未命名1.jpg (2013-2-8 19:11, 64.09 KB) / 下載次數 50
https://h1.hkepc.com/forum/attachment.php?aid=1491739&k=df08a9595d8c6f3a9bcd906940fc8fc5&t=1780894116&sid=1ckgJcojcec


作者: anonymoushk    時間: 2013-2-8 19:31

回復  foktk138


    我唔係用Z77果時,都試過去到3300.00MHz,咁而家係咪叫超左?
wasd12345600 發表於 2013-2-8 19:11



   
it call turbo boost , which is official release more power under certain TDP limit

for z77 i remember there was extra step can be adjust , also the bCLK can add from 100 - 10x (some board like 108 , some 105 , test it out you self , but careful this setting may damage the hardware )
作者: qtrack    時間: 2013-2-8 19:31

呢樣只係Intel® Turbo Boost Technology 同 Enhanced Intel SpeedStep® Technology, 即係粒CPU會因應節能/運算需要,自己控制multiplier 由x16-x33之間變動, 而只有K尾既CPU with Z77/Z68/P67, 例如2600K, 3770K先可以set更高既multiplier, 例如x40, x50
作者: foktk138    時間: 2013-2-8 19:40

回復 3# wasd12345600


超頻:比預設頻率高
作者: Cakelovee    時間: 2013-2-18 17:26

提示: 作者被禁止或刪除 內容自動屏蔽
作者: ping2412    時間: 2013-2-19 23:42

turbo boost is a way to maximize power consumption and performance...





歡迎光臨 電腦領域 HKEPC Hardware (https://h1.hkepc.com/forum/) Powered by Discuz! 7.2