作者: iamkit 時間: 2010-10-5 09:22 標題: 想upgrade 舊廠機
公司用舊hp, 想全部機換, 要番個case, budget 4-5000, 唔知ching 們有冇辦法
[attach]1088673[/attach]
[attach]1088674[/attach]
(圖copy from yahoo 拍賣)
作者: ahllau 時間: 2010-10-5 09:26
無記錯依隻係 propertiary form factor, 底板/火牛 全部非標準
你買唔到野就咁換的
好心機既 DIY 例外, 不過你話係公司機, 唔值得咁做
作者: iamkit 時間: 2010-10-5 09:35
回復 2# ahllau
其實公司都係自己haha, 不過我幾鍾意個case , 所以睇下有冇辦法..我開左部機, 個火牛完全唔一樣= =
作者: ahwahwah 時間: 2010-10-5 12:48
回復 3# iamkit
廠機D前置USB位完全唔啱插其他板~~
作者: iamkit 時間: 2010-10-5 17:02
回復 4# ahwahwah
咁我唔要前置呢， 有冇計
作者: chris1234567 時間: 2010-10-5 20:08
廠機真係難搞...
作者: ediot 時間: 2010-10-5 22:13
i've had a similiar situation a while back with a DELL inspiron, i can tell you it's not really worth the effort....
you can't install bigger/different fans, you're stuck with those 8mm fans with a strange molded in structure that attaches to the case. the board pinouts to front panel LOOK the same but are rearranged, you can't tell (even via research online, i've done it for HOURS) which is which. if you have a new board, the case front panel wires have a single plastic 8-jumper mold that plugs in and wouldn't work, with a slight chance of frying something as well.
also, at the bottom of the board you need standoff screws to elevate the board from the case - those are set in, you can't change configuration and you can't take them out. with a new board you can't even secure it to the case properly, unless the standoff screw setup is exactly the same.... which they aren't.
in my Dell it uses a G33m02 (dell version) board, and i've compared it to the retail version of G33m02, and they have SIMILAR specs but difference physical placement.
it's a shame to have to tell you this but upgrading parts inside isn't really feasible. (this is also how HP/DELL etc keep their corporate business)
作者: tony111hk 時間: 2010-10-5 22:22
廠機設計上唔係俾你自己upgrade架
作者: tkf 時間: 2010-10-5 23:30
頂盡換ram,cpu...
作者: iamkit 時間: 2010-10-6 01:21
今日我見到個火牛, 已經放棄 , 梯形
我見佢個CASE 咁靚先想留佢...
作者: ahwahwah 時間: 2010-10-6 14:19
算啦.....薄機箱出面大把選擇
作者: JT2106 時間: 2010-10-6 16:19
影張內視圖黎睇下我幫唔幫到你，因為我都成日用廠機機箱黎砌機，
就咁睇你機背都好可能係用M-ATX板既…
不過講明先，可能好多線都要自己DIY改位，例如POWER , USB , LED燈位個D…