作者: chungsm 時間: 2018-3-11 15:37 標題: 請問同廠nas,舊硬碟移去新nas問題
請問同廠nas,舊硬碟移去新nas,是否不需再格式化呢? 謝謝告知
作者: antony85 時間: 2018-3-11 18:00
synology
NO Need
作者: chungsm 時間: 2018-3-11 18:52
thanks
作者: 炎冬 時間: 2018-3-11 19:08
QNAP no need
作者: 你朋友 時間: 2018-3-11 23:07
S係唔係, SETUP好個新NAS 插返蕭HARDDISK就認到D FILE?
作者: 9658@transperth 時間: 2018-3-11 23:34
Qnap系統遷移
請依照下列步驟執行系統遷移:
1. 關閉來源 NAS 並拔下硬碟。
2. 從舊硬碟托盤取出硬碟,並安裝到新 NAS 的硬碟托盤。
3. 將硬碟插入目標 NAS(新機型)。確定以原來的順序安裝硬碟。
4. 依照快速安裝手冊 (QIG) 的指示,連接新 NAS 的電源線和網路線。
5. 開啟新的 NAS。以系統管理員身分登入網頁管理介面(NAS 預設登入 ID 和密碼均為 admin)。
6. 如果系統通知需要為新 NAS 更新韌體,請依照指示下載並安裝韌體。
7. 按一下[開始遷移]。NAS 會在系統遷移後重新啟動。所有資料和設定都會保留。
Details:
http://docs.qnap.com/nas/4.3/cat ... ystem_migration.htm
作者: chungsm 時間: 2018-3-12 14:10
thanks,昨天剛入ts-431p2,2隻硬碟內 從ts-219ii轉移去431,真方便
作者: pc1668 時間: 2018-3-12 14:25
本帖最後由 pc1668 於 2018-3-12 14:28 編輯
Congratulations
I'm also using ts-431p2 (upgraded to 8GB ram). I think the AL-314 is good enough for non-demanding users. One of the very welcome feature of QTS is the support of volume encryption! Just don't know why DSM does not implement such useful feature!
作者: stanley_chung 時間: 2018-3-12 14:29
回覆 7# chungsm
注意,storage pool 可能因為還是舊系統,不支援 snap-shot 功能。
當日,我也能成功轉移,但最終要重灌....
作者: pc1668 時間: 2018-3-12 14:33
本帖最後由 pc1668 於 2018-3-12 15:09 編輯
回覆 chungsm
注意,storage pool 可能因為還是舊系統,不支援 snap-shot 功能。
當日,我也能成功轉移, ...
stanley_chung 發表於 2018-3-12 14:29
I always prefer a total refresh/reformat of all HDDs, making use of the latest firmware feature sets
作者: chungsm 時間: 2018-3-12 15:11
回覆 chungsm
注意,storage pool 可能因為還是舊系統,不支援 snap-shot 功能。
當日,我也能成功轉移, ...
stanley_chung 發表於 2018-3-12 14:29
我無用快照功能
作者: chungsm 時間: 2018-3-12 15:12
Congratulations
I'm also using ts-431p2 (upgraded to 8GB ram). I think the AL-314 is g ...
pc1668 發表於 2018-3-12 14:25
我 1g ran 都夠
我用黎裝音樂檔案
作者: pc1668 時間: 2018-3-12 15:21
ic, then it should be good enough
作者: CardCaptor 時間: 2018-3-12 15:37
回覆 5# 你朋友
No, just plug HDD without setup.
After upgrade DSM, most config will apply in the new NAS.

