Board logo

標題: [測試] VERTEX4 128G @ 1.5beta firmware [打印本頁]

作者: leotonch    時間: 2012-7-2 19:16     標題: VERTEX4 128G @ 1.5beta firmware

本帖最後由 leotonch 於 2012-7-2 19:39 編輯

EIST=ON, 1.6<>4.5G at 3770K
速度ok嗎?

圖片附件: V4 128G 1.5beta.jpg (2012-7-2 19:15, 76.59 KB) / 下載次數 57
https://h1.hkepc.com/forum/attachment.php?aid=1393726&k=7301ee905d8d0858d217b0d949ae1be2&t=1781885100&sid=4sHy7ZZyTw



圖片附件: V4 128G 1.5beta AS SSD 1.6.4.jpg (2012-7-2 19:38, 87.32 KB) / 下載次數 61
https://h1.hkepc.com/forum/attachment.php?aid=1393757&k=d0b62030809e4a063e2391be784f765f&t=1781885100&sid=4sHy7ZZyTw


作者: wailly    時間: 2012-7-2 20:04

回復 1# leotonch

Good speed considered this is a 128gb drive~
作者: alien11    時間: 2012-7-2 20:27

過千...應該都數一數二啦
作者: 好好先生    時間: 2012-7-2 21:27

提示: 作者被禁止或刪除 內容自動屏蔽
作者: 10875981    時間: 2012-7-2 21:28

好快....
但可唔可以開住WINDOW黎更新FIRMWARE??
作者: 卡洛斯牛頓    時間: 2012-7-2 21:38

真係激快......
作者: leotonch    時間: 2012-7-2 21:48

回復 5# 10875981


http://www.ocztechnology.com/ssd ... ex_4_and_Agility_4/
WARNING: This is NOT a Destructive Flash for firmware version 1.4 and newer. This is a Destructive Flash for firmware version 1.3 & 1.4RC, back up all data on SSD. Proceeding with this update will result in complete loss of data on the SSD. You will not be able to revert back to a previous firmware revision.


For firmware version 1.3 & 1.4RC, this firmware tool cannot update on a primary boot drive.

WARNING: This is a two step firmware update process for firmware older than 1.4.1.2. Otherwise it is a one step process.

1.  Run OCZ Toolbox. Toolbox will update firmware to 1.4.1.2 first.

2.  Shutdown and restart the system.

3.  Run OCZ Toolbox again, Toolbox will now update to the latest firmware revision.

This completes the firmware update.
作者: 無相王    時間: 2012-7-2 22:51

本帖最後由 無相王 於 2012-7-4 00:34 編輯

2.jpg 3.jpg 4.jpg 好慢

5.jpg UPDATE DRIVER後

圖片附件: 2.jpg (2012-7-2 22:51, 79.37 KB) / 下載次數 66
https://h1.hkepc.com/forum/attachment.php?aid=1393891&k=fea9cecb0743b8be8d8092fb01ab7778&t=1781885100&sid=4sHy7ZZyTw



圖片附件: 3.jpg (2012-7-2 22:51, 91.24 KB) / 下載次數 63
https://h1.hkepc.com/forum/attachment.php?aid=1393892&k=a2f913ca43ac48cc385e1ac8e57abc6b&t=1781885100&sid=4sHy7ZZyTw



圖片附件: 4.jpg (2012-7-2 22:51, 113.09 KB) / 下載次數 62
https://h1.hkepc.com/forum/attachment.php?aid=1393893&k=3d31eff0132ea2a2e549f45fefdd1414&t=1781885100&sid=4sHy7ZZyTw



圖片附件: 5.jpg (2012-7-4 00:34, 79.97 KB) / 下載次數 75
https://h1.hkepc.com/forum/attachment.php?aid=1394575&k=60e430606ec6ef89110867f6082f6429&t=1781885100&sid=4sHy7ZZyTw


作者: alien11    時間: 2012-7-2 23:26

回復 8# 無相王


    係咪用intel?轉driver再試下
作者: 無相王    時間: 2012-7-3 00:52

回復  無相王


    係咪用intel?轉driver再試下
alien11 發表於 2012-7-2 23:26


UPDATE DRIVER?
作者: MirageKnight    時間: 2012-7-3 12:28

1.5beta有沒有fix 128GB V4 當SSD容量少過一半時. 嚴重失速問題?
作者: alien11    時間: 2012-7-3 20:47

回復 10# 無相王


    轉intel driver
作者: 無相王    時間: 2012-7-4 00:35

回復  無相王


    轉intel driver
alien11 發表於 2012-7-3 20:47



    轉左,好似快左又慢左
作者: aeolian2009    時間: 2012-7-4 00:56

呢個版係官方定點  我依家好似未見到UP





歡迎光臨 電腦領域 HKEPC Hardware (https://h1.hkepc.com/forum/) Powered by Discuz! 7.2