作者: cheryl12 時間: 2013-1-9 13:18 標題: any one buy chassis from TB ?
提示: 作者被禁止或刪除 內容自動屏蔽
作者: harial 時間: 2013-1-9 14:06
gd for wat?
作者: 18146 時間: 2013-1-11 11:18
回復 1# cheryl12
不能一概而論，TB 有非常多款機箱選擇。價錢、牌子、各店的信譽都不同。在 TB 買野，最好先看看該貨品和該店整體的信用評價。
作者: Maxilogic 時間: 2013-1-27 18:32
本帖最後由 Maxilogic 於 2013-1-28 12:45 編輯
I bought one, 超頻三飞扬S1 for RMB 99.00, good deal.
I didn't plan to buy from Taobao but because of the sales guy's attitude in SSP. I decided to buy from taobao. F1 is not bad for the price.
作者: 不訣天 時間: 2013-1-27 21:29
最近買左個silverstone SG03-F(全新貨) 人仔299+142港紙運費!無買錯^^
作者: tea 時間: 2013-1-28 09:48
本帖最後由 tea 於 2013-1-28 09:54 編輯
I bought one, 超頻三飞扬F1 for RMB 99.00, good deal.
I didn't plan to buy from Taobao but because o ...
Maxilogic 發表於 2013-1-27 18:32
師兄，你買這個機箱真的不錯！ 好 Slim、散熱不錯、 有 USB 3.0 、全部金屬底面都噴左油。
請問運費是多少？ 從廣州定深圳發貨？ Thanks !
作者: Maxilogic 時間: 2013-1-28 12:49
本帖最後由 Maxilogic 於 2013-1-28 13:09 編輯
回復 6# tea
Sorry I type the wrong model number. It should be S1 not F1. S1 is the old model, the only diff is the front panel (USB2 vs USB3). The rest is the same
請問運費是多少？ Free Shipping to 廣州, 廣州 to HK 3kg (together with other goods)
Few comments:
1. The chassis is light and therefore don't expect a very solid case, but good enough for the purpose.
2. The chassis support cable management (run the cable at the back), but the space for HDD is really tight. It is perfectly OK if you are going to use 1 3.5" HDD only.
3. The ventilation is OK but not really good. Too many openings doesn't means good ventilation. In fact, it defeat the purpose of the top ventilation fan (no air flow path) . If you are going to use more than 1 HDD, DIY fan in front of the HDD may be necessary to cool the HDDs.
4. I like the position of the power supply, the openings provide good airflow for the PSU. However, I have to modify the power cable by extending it by 6 inches.
作者: tea 時間: 2013-1-28 13:29
本帖最後由 tea 於 2013-1-28 13:31 編輯
回復 7# Maxilogic
感謝師兄詳細回覆！ 請問這個機箱用甚麼火牛？ 火牛放在機箱的哪個位置？
modify the power cable by extending it by 6 inches --------- why and how ? Thanks !
作者: Maxilogic 時間: 2013-1-28 14:54
本帖最後由 Maxilogic 於 2013-1-28 14:55 編輯
圖片附件: 20121110_112929 FinePix_J27_J28_J29 DSCF2861.jpg (2013-1-28 14:55, 38.7 KB) / 下載次數 12https://h1.hkepc.com/forum/attachment.php?aid=1486775&k=9f4479e52c4e06166f6e1975104dfb67&t=1782066663&sid=1NGQiUs6bs
作者: yuppies 時間: 2013-1-28 14:55
想要佢個底托 ONLY
作者: 契爺 時間: 2013-1-28 16:34
其實呢類箱腦場都好多, GTR , 立人果類
呢隻好在佢MATX牛就朝天放, D風右入上出, 唔影響立機。
不過大家都係用得LP 顯卡, 所以厚度其實差不多的
作者: karma075 時間: 2013-1-28 17:56
回復 tea
Sorry I type the wrong model number. It should be S1 not F1. S1 is the old model, the on ...
Maxilogic 發表於 2013-1-28 12:49
Ching, does a 24cmx24cm matx MB fit in this chasis?
作者: Maxilogic 時間: 2013-1-28 18:13
回復 12# karma075
Not sure. See for yourself, my board is 24.4 cm x 22cm(seems ok)
圖片附件: 20121110_112914 FinePix_J27_J28_J29 DSCF2860.jpg (2013-1-28 18:13, 111.61 KB) / 下載次數 12https://h1.hkepc.com/forum/attachment.php?aid=1486823&k=d0aded6b77da5e5ca5dde9be62475f49&t=1782066663&sid=1NGQiUs6bs
