作者: dcpen 時間: 2012-10-21 23:41 標題: 請求AsRock B75M x Antec Fusion Remote安裝iMON教學
LCD MON同REMOTE都整唔掂
希望有Ching幫一幫助
作者: rayzine 時間: 2012-10-22 10:10
Support!!!
作者: 觀星是答案 時間: 2012-10-22 10:29
好難整的嗎 ? 雖然唔係用緊你 O個隻 case , 但我隻 case 都用緊 iMon
應該只係駁 USB , Power button 就一開二之纇 (等你可以用 remote 開機)
Windows 入面裝個 software 就已經有 O野睇
作者: rayzine 時間: 2012-10-22 12:27
好難整的嗎 ? 雖然唔係用緊你 O個隻 case , 但我隻 case 都用緊 iMon
應該只係駁 USB , Power button 就一 ...
觀星是答案 發表於 2012-10-22 10:29
Hope so....
Actually, I got the case but install it yet...

作者: klshiu 時間: 2012-10-22 20:46
But where to connect the 3-pin white connector? Is the USB connect to on-board USB port?
作者: rayzine 時間: 2012-10-23 00:30
要用附送的24PIN線
連接有另3PIN線LED顯視才會亮
P.S. The 3pin connector cable may under the DVD-ROM compartment. Pls remove it and you may see it. Good luck.
作者: rayzine 時間: 2012-10-23 00:52
本帖最後由 rayzine 於 2012-10-23 01:29 編輯
The given USB cable which come from the front panel with a 4 pins internal USB connector. Just connect it to your mobo internal USB header.
https://h1.hkepc.com/forum/attachment.php?aid=1446440&k=40b61c534acc19cb673566b916484425&t=1782147150&sid=TmyVHDOQA3

作者: klshiu 時間: 2012-10-23 10:15
要用附送的24PIN線
連接有另3PIN線LED顯視才會亮
P.S. The 3pin connector cable may under the DVD-ROM ...
rayzine 發表於 2012-10-23 00:30
where to connect the 3-pin white connector? Thanks!
作者: rayzine 時間: 2012-10-23 12:19
本帖最後由 rayzine 於 2012-10-23 12:23 編輯
U mean u cant find the 3pin connector from the front panel?
Or from the power supply.
作者: klshiu 時間: 2012-10-23 12:33
U mean u cant find the 3pin connector from the front panel?
Or from the power supply.
rayzine 發表於 2012-10-23 12:19
Front panel, where to connect it? Could you take a photo?
作者: rayzine 時間: 2012-10-23 13:48
Did u remove the dvd rom compartment?
Look carefully and one of the cable with the white 3pin connector
作者: klshiu 時間: 2012-10-23 14:16
Thanks rayzine! Recheck the Antec case and found the 24-pin power to 24-pin with 3-pin extension that connects to the white connector. Now the LCD works!
作者: rayzine 時間: 2012-10-23 17:44
U r welcome.
Good. Yes, it a bit tricky to use the external 24 pin power cord.


