作者: Pennylau 時間: 2019-8-23 09:54 標題: tin tin hifi p1
本帖最後由 Pennylau 於 2019-8-23 09:57 編輯
又有得買啦，149呢個價位，買唔買得過呢？
網上似乎得鬼佬review, 唔多，但唔錯。
我唯一聽過既平面耳機係CL2 Planar，真係驚為天人，好貴鍾意o固種味道，但價錢買唔起，同埋個mmcx頭好緊，好難換線。
唔知呢隻有幾多成功力？
作者: cocteau 時間: 2019-8-23 14:28
本帖最後由 cocteau 於 2019-8-23 14:29 編輯
係咪即係TinHifi P1？
我有個鬼佬網友佢係Sound engineering professor，推介呢隻野比我，我話: iem No la。。。
ps. 佢用RME ADI 2 DAC Pro去推
作者: Pennylau 時間: 2019-8-23 15:59
係咪即係TinHifi P1？
我有個鬼佬網友佢係Sound engineering professor，推介呢隻野比我，我話: iem No la ...
cocteau 發表於 2019-8-23 14:28
係啊，原黎淘寶都係千頭人仔，咁可以慢慢諗，睇下入唔入！
作者: qazxcdewq 時間: 2019-8-23 16:26
本帖最後由 qazxcdewq 於 2019-8-23 16:28 編輯
1千頭都諗得過 有d想試
via HKEPC IR Pro 3.5.2 - Android(3.2.0)
作者: wingwingkc 時間: 2019-8-23 16:44
這隻我都好有興趣,之前上網見瘦佬有DEMO,所以特登去試,利申:我本身有ISINE10,所以想買多隻帶得出街嘅平板入耳,聽感:同網上大部份評價接近, 微動態/細節做得好好,佢唔係一般動鐵果種沖,尖,吉耳果種高音,係多細節得來係舒服,還原度亦很高,我即時同時比較過隻NX7, D高音又吉又沖,依D都係平板嘅優勢,但亦有佢幾樣好大嘅缺點:佢因為隻平板只有10MM, 隻野係偏中高,而且係非常大食,手機用V20 要用MAX 先夠聲(而且係偏薄聲),手機推(V20)直頭唔多覺有BASS,估計用耳放最多都係見到個型,見唔到任何量,點到即止嘅bass,這令我有點卻步(我用V20推ISINE 10只要40/100),而且平衡得多,完全冇依個問題),建議真係去瘦佬度試左先,唔好盲入!
作者: makeedee 時間: 2019-8-23 17:26
這隻我都好有興趣,之前上網見瘦佬有DEMO,所以特登去試,利申:我本身有ISINE10,所以想買多隻帶得出街嘅平板入 ...
wingwingkc 發表於 2019-8-23 16:44
玩得呢類野好難用手提機推得好
作者: royau 時間: 2019-8-23 17:33
回覆 6# makeedee
可以考慮用 FIIO BTR OR ES100 去推,應該夠力
作者: tskso 時間: 2019-8-23 17:36
提示: 作者被禁止或刪除 內容自動屏蔽
作者: wingwingkc 時間: 2019-8-23 17:51
本帖最後由 wingwingkc 於 2019-8-23 18:09 編輯
ISINE 30MM平板用手機推完全冇問題, P1係特別難推,我亦有親人有聲菲爾隻平板,P1 細節中高頻都做得好過聲菲爾,但聲菲爾隻平板整體上"完整"好多,手機推亦冇問題,本人亦有DAC 及 AMP,唔覺得P1 中低頻會因為耳擴而有極大變化, HEADFI 平論,絕大多數係建議用AMP 重要加BASS 増益/較EQ 先有較好嘅結果,我唔係話P1差,唔係我都唔會想去試,但你可以想像佢係一隻有少少似XELENTO風格嘅耳機,但冇左中低
作者: leungleung1234 時間: 2019-8-23 17:56
我之前都有試過Demo，呢隻真係好難推。
via HKEPC Reader for Android
作者: wingwingkc 時間: 2019-8-23 18:07
回覆 7# royau
我冇btr3 或es100 但headhi d人 話用es100 要
推到接近/max 的
作者: wingwingkc 時間: 2019-8-23 18:12
回覆 8# tskso
這個感覺我都有,感覺試唔真 除了環境,我感覺個耳膠唔太岩size 去試最好換埋自己隻膠試
作者: shinewallace 時間: 2019-8-23 18:40
小弟用m11 gainH 開到70幾， 用spinfit 基本個對，非常舒服
因為spiral dot++ 個啲，p1支咀太長唔太岩咁
作者: philipsrev 時間: 2019-8-23 18:59
ISINE 30MM平板用手機推完全冇問題, P1係特別難推,我亦有親人有聲菲爾隻平板,P1 細節中高頻都做得好過聲 ...
wingwingkc 發表於 2019-8-23 17:51
聲菲爾隻平板<--MT100? 呢隻唔係純平板,同埋粒平板單元個結構好似有啲唔同。
圖片附件: O1CN011ESnTTF5Qum3y2B_!!125780351 (2).jpg (2019-8-23 18:59, 148.41 KB) / 下載次數 77https://h1.hkepc.com/forum/attachment.php?aid=2145500&k=29e0d2014aab60f9bd4d16a2b04b76be&t=1783122102&sid=4854zdGmdq
作者: wingwingkc 時間: 2019-8-23 19:12
回覆 14# philipsrev
係,唔係全平板,聲音完整好多,
但一定要換線,換線聲音變化好大,我換過萬隆金銀線同武藤金銀線 比原裝差別好大,當然,兩條線都貴過隻耳機。
作者: Pennylau 時間: 2019-8-23 21:20
原黎好多師兄試過， 睇黎我都要試下先入手～
via HKEPC Reader for Android
作者: royau 時間: 2019-8-26 10:01
回覆 11# wingwingkc
佢地有冇講用2.5 定3.5 入? 同埋 ES100 有2倍 電壓, 最高可以到6.4 V(3.2 -3.2)
作者: wingwingkc 時間: 2019-8-26 11:28
回覆 wingwingkc
佢地有冇講用2.5 定3.5 入? 同埋 ES100 有2倍 電壓, 最高可以到6.4 V(3.2 -3.2) ...
royau 發表於 2019-8-26 10:01
好似冇交代得咁詳細,淨係話有BTR3,ES100 同FIIO 耳擴,結果最終結果係用FIIO 獨立耳擴
作者: wingwingkc 時間: 2019-8-26 11:49
回覆 17# royau
COPY 左其中一位用家,當中有講ES100 on P1,用MAX VOLUME 有少少UNDER 情況,用老鼠尾就直頭唔得.
First off, the Google Pixel USB-C audio adapter is very inadequate for the P1. At max volume on my Essential PH-1 phone running stock android, I was only able to get it to lower than average listening volume. Luckily, the Apple lightning adapter proved much better results using my iPad Mini 4 as a source.
I used the RME ADI-2 DAC and I felt it was a little weak and underpowered using it’s IEM output, but at the time, I wasn’t completely settled on tips yet, so that could have played a large role in what I was hearing. I did have very good luck using a desktop Pete Millett Starving Student Tube Hybrid amp, which was a DIY creation. This one provided plenty of power and really made the P1 show it’s true potential.
I finally received the Massdrop THX-789 amplifier, and my first trial was with the RME ADI-2 DAC paired with it using balanced connectors, and with the Tin P1 plugged into the balanced XLR jack (using a 2.5mm cable and adapter). I found that I was about 10-11 o'clock on the dial using Medium Gain (Setting II) on the amp, with the RME at -10dB volume.
On the DAPs front, I own the Astell & Kern SR15 and Pioneer XDP-300R. Both were pushing higher volume requirements than most of my other IEMs, and even more than the Etymotics ER2XR that I purchased recently. The ME1, in comparison, is much less power hungry, in terms of pure volume loudness.
For bluetooth audio, I use the Radsone ES100, which features both single-ended 3.5mm and balanced 2.5mm outputs. Here's my findings:
ES100 with P1 - Source at 100% volume
3.5mm : I'm at a good low listening volume at -15dB (-60dB to +6dB scale) but can definitely get louder if i wanted to.
2.5mm : I'm good at about -15dB volume as well
in both cases -10dB would be my "fun" listening volume.